Inspection |
1. |
Disconnect the IMS control switch connector.
|
2. |
With the power IMS control switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the IMS control switch.
|
Removal |
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the front door trim panel.
(Refer to Body - "Front Door Trim")
|
3. |
After removing the mounting screws and switch connector (B), then remove
the IMS control switch bracket (A) from the front door trim panel.
|
Installation |
|
1. |
Connect the connectors and reassemble the IMS control switch.
|
2. |
Reassemble the seat side cover.
|
Kia Cee'd JD Service Manual: Gear Actuator Repair procedures
Removal
1.
Turn off the ignition switch and then disconnect the battery (-) cable.
2.
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
3.
...
Kia Cee'd JD Service Manual: Audio Remote Control Repair procedures
Inspection
Type A
1.
Check the audio remote control switch (A) for resistance between terminals
in each switch position.
[Audio]
Switch
Connector
terminal
Res ...