Kia Cee'd: Vehicle stability management (VSM) / VSM operation off
If you press the ESC OFF button to turn
off the ESC, the VSM will also cancel and
the ESC OFF indicator light (
)
illuminates.
To turn on the VSM, press the button again. The ESC OFF indicator light goes out.
VSM operation
When the VSM is operating:
ESC (Electronic Stability Control) ()
light will blink.
The steering wheel may be controlled.
When the vehicle stability management
is operating properly, you ...
Malfunction indicator
The VSM can be deactivated even if you
don’t cancel the VSM operation by pressing
the ESC OFF button. It indicates that
a malfunction has been detected somewhere
in the EPS (Electronic Power ...
Other information:
Kia Cee'd JD Service Manual: Description and operation
Description
Clutch switch is connected to clutch pedal and transmits clutch operating state
to ECM.
When clutch pedal is depressed during driving, engine load changes from loaded
to none loaded condition. However, ECM regards vehicle to be loaded becuase
VSS signal is s ...
Kia Cee'd JD Service Manual: Transmission Control Module (TCM) Repair procedures
Inspection
Transmission Control Module (TCM) Inspection
Procedure
1.
Inspecting TCM ground circuit: Measure the resistance between the TCM
and chassis ground.
(Check the terminal connected to the chassis ground while using the
ba ...
