Kia Cee'd: Vehicle stability management (VSM) / VSM operation
When the VSM is operating:
- ESC (Electronic Stability Control) (
)
light will blink. - The steering wheel may be controlled. When the vehicle stability management is operating properly, you can feel a slight pulsation in the vehicle. This is only the effect of brake control and indicates nothing unusual.
The VSM does not operate when:
- Driving on bank road such as gradient or incline
- Driving rearward
- ESC OFF indicator light (
)
remains
on the instrument cluster - EPS (Electronic Power Steering) indicator light remains on the instrument cluster
Vehicle stability management
(VSM)
This system provides further enhancements
to vehicle stability and steering
responses when a vehicle is driving on a
slippery road or a vehicle detected
changes in coefficient of friction betw ...
VSM operation off
If you press the ESC OFF button to turn
off the ESC, the VSM will also cancel and
the ESC OFF indicator light ()
illuminates.
To turn on the VSM, press the button again.
The ESC OFF indicator ...
Other information:
Kia Cee'd JD Service Manual: High Mounted stop lamp Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear spoiler assembly (A).
(Refer to Body - "Rear Spoiler")
3.
Remove the high mounted stop lamp (A) after ...
Kia Cee'd JD Service Manual: Crankshaft Position Sensor (CKPS) Description and operation
Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one
of the most important sensors of the engine control system. If there is no CKPS
signal input, the engine may stop because of CKPS signal missing.
This sensor is installed in ladder fra ...
