Kia Cee'd: Armed stage / Using the smart key
Park the vehicle and stop the engine. Arm the system as described below.
1. Turn off the engine.
2. Make sure that all doors, the engine hood and tailgate are closed and latched.
3. • Lock the doors by pressing the button of the front outside door handle with the smart key in your possession. After completion of the steps above, the hazard warning lights will operate once to indicate that the system is armed.
If the tailgate or engine hood remains opened, the hazard warning lights will not operate and theft-alarm will not arm. After this, if the tailgate and engine hood are closed, the hazard warning lights will blink once and the theft-alarm will arm.
• Lock the doors by pressing the lock button on the smart key.
After completion of the steps above, the hazard warning lights will operate once to indicate that the system is armed.
If the tailgate or engine hood remains opened, the hazard warning lights will not operate and theft-alarm will not arm. After this, if the tailgate and engine hood are closed, the hazard warning lights will blink once and the theft-alarm will arm.
Armed stage
...
Using the transmitter
Park the vehicle and stop the engine.
Arm the system as described below.
1.Turn off the engine and remove the
ignition key from the ignition switch.
2.Make sure that all doors, the engine
hood ...
Other information:
Kia Cee'd JD Owners Manual: Pairing PHONE key on the Steering Remote
Controller
When No Devices have been
Paired
1. Press the key or the
key on the steering remote
controller.
The following screen is displayed.
2. Press the button to enter the
Pair Phone screen.
(1) Device : Name of device as
shown when searching from your
Bluetooth® Wireless Technology
...
Kia Cee'd JD Service Manual: Rear Transverse Trim Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
Use ...
