Kia Cee'd: Manual transaxle operation / Using the clutch
The clutch pedal should be depressed all the way to the floor before shifting, then released slowly. The clutch pedal should always be fully released while driving. Do not rest your foot on the clutch pedal while driving. This can cause unnecessary wear. Do not partially engage the clutch to hold the vehicle on an incline. This causes unnecessary wear. Use the foot brake or parking brake to hold the vehicle on an incline. Do not operate the clutch pedal rapidly and repeatedly.
CAUTION
When operating the clutch pedal, depress the clutch pedal down fully. If you don’t depress the clutch pedal fully, the clutch may be damaged or noise may occur.
Manual transaxle operation
■ Type A
■ Type B
The manual transaxle has 6 forward
gears.
This shift pattern is imprinted on the
shift knob. The transaxle is fully synchronized
in all forward gears so shift ...
Downshifting
When you must slow down in heavy traffic
or while driving up steep hills, downshift
before the engine starts to labor.
Downshifting reduces the chance of
stalling and gives better acceleration ...
Other information:
Kia Cee'd JD Service Manual: Input Speed Sensor 1 Repair procedures
Inspection
Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor.
Removal
1.
Turn off the ignition switch and then disconnect the battery (-) cable.
2.
Remove the under cover.
3.
...
Kia Cee'd JD Service Manual: General information
Towing
If the vehicle needs to be towed, call a professional towing service. Never
tow vehicle with just a rope or chain. It is very dangerous.
Emergency Towing
There are three popular methods of towing a vehicle :
–
The operator loads the ...
