Kia Cee'd: Lighting System / Turn Signal Lamp Repair procedures

Kia Cee'd JD Service Manual / Body Electrical System / Lighting System / Turn Signal Lamp Repair procedures

Removal
Door Mirror Turn Signal Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the mirror (A) from the mirror holder.

  
Be careful not to be damage the fixing clip (A).

3.
Disconnect the heating connectors (A) and BSD indicator connector (B) from the mirror.

4.
Disengage the fixing clip and remove the door mirror cover (A).

  
Take care not to damage the mirror cover fixing clip.
5.
Loosen a screw and disconnect the connector (A). Remove the door mirror turn signal lamp (B).

Installation
Door Mirror Turn Signal Lamp
1.
Install the door mirror turn signal lamp to the door mirror.
2.
Install the door mirror.
3.
Connect the negative (-) battery terminal.
Rear Combination Lamp Repair procedures
Removal [5Door] Rear Combination lamp (Inside) 1. Disconnect the negative (-) battery terminal. 2. Remove the rear comb ...

Puddle Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror (A) from the mirror holder. ...

Other information:

Kia Cee'd JD Service Manual: Brake Pedal Repair procedures
Removal [LHD] 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. (Refer to Body - "Crash pad lower panel") 3. Remove the s ...

Kia Cee'd JD Owners Manual: For vehicle’s equipped with smart key system
Key not in vehicle If the smart key is not in the vehicle and if any door is opened or closed with the engine start/stop button in the ACC, ON, or START position, the warning illuminates on the LCD display. Also, the chime sounds for 5 seconds when the smart key is not in the vehicle ...

© 2017-2025 www.kceed.com