Kia Cee'd: Keyless Entry and Burglar Alarm / Transmitter Specifications

Specification
 
Item
Description
Power source
3V
Operating temperature
-20°C ~ +60°C (-4°F ~ +140°F)
RF frequency
433.92MHz
Battery
CR2032
Transmissible distance
30m or more
Life of battery
2years or more(at 20 times per day)
Button number
3
Function
Door lock
Door unlock
Tailgate unlock

Repair procedures
Inspection Front Door Lock Module Inspection 1. Remove the front door trim. (Refer to Body - "Front Door Trim") 2. ...

Transmitter Repair procedures
Inspection 1. Check that the red light flickers when the door lock or unlock button is pressed on the transmitter. 2. Remove the ba ...

Other information:

Kia Cee'd JD Service Manual: Water Temperature Control Assembly Repair procedures
Removal and Installation 1. Loosen the drain plug, and drain the engine coolant. Remove the radiator cap to drain with speed. 2. Disconnect the battery negative terminal. 3. Remove the air cleaner ass ...

: Keyless Entry Settings
Switching Keyless Entry On and Off Switch the ignition on using an original key that has not been created as a MyKey. Press Settings on the touchscreen. Press Vehicle Settings. Press Locks. Reprogramming the Unlocking Function You can enable two-stage unlocking function allowing you to un ...

© 2017-2026 www.kceed.com