Kia Cee'd: Trailer Towing / Trailer brakes
If your trailer is equipped with a braking system, make sure it conforms to your country’s regulations and that it is properly installed and operating correctly.
If your trailer weight exceeds the maximum allowed weight without trailer brakes, then the trailer will also require its own brakes as well. Be sure to read and follow the instructions for the trailer brakes so you’ll be able to install, adjust and maintain them properly.
• Do not tap into or modify your vehicle's brake system.
WARNING - Trailer brakes
Do not use a trailer with its own brakes unless you are absolutely certain that you have properly set up the brake system. This is not a task for amateurs. Use an experienced, competent trailer shop for this work.
Safety chains
You should always attach chains
between your vehicle and your trailer.
Cross the safety chains under the tongue
of the trailer so that the tongue will not
drop to the road if it becomes separa ...
Driving with a trailer
Towing a trailer requires a certain amount
of experience. Before setting out for the
open road, you must get to know your
trailer. Acquaint yourself with the feel of
handling and braking with ...
Other information:
Kia Cee'd JD Service Manual: BJ Boot Components and components location
Components
1. BJ
assembly
2. BJ circlip
3. BJ boot band
4. BJ boot
5. Dynamic
damper band
6. Dynamic damper
7. Shaft
8. TJ boot band
9. TJ
boot
10. Spider assembly
11. Retainer ring
12. TJ housing
...
Kia Cee'd JD Service Manual: Side Impact Sensor (SIS) Description and operation
Description
The Side Impact Sensor (SIS) system consists of two front SIS which are installed
inside the Center Pillar (LH and RH). They are remote sensors that detect acceleration
due to collision at their mounting locations. The primary purpose of the Side
Impact Sensor (S ...
