1. Open the cover (if equipped) for the holder position (1) or (2) you want to install.
2. Compress the one side net upper shaft to length direction before insert the net upper shaft into the large hole (3) and then secure by sliding into the small hole (4).
3. Hang the net strap hooks in the corresponding hook holders on the floor behind the front seat or rear seat.
This symbol indicates the position of the hook holders on the floor behind the rear seat.
4. Fasten the straps, by using the adjuster (1).
WARNING
WARNING
Kia Cee'd JD Service Manual: Steering Gear box Repair procedures
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub.
Tightening torque :
88.2 ...
Kia Cee'd JD Service Manual: Repair procedures
Inspection
Lighting Switch Inspection
With the multifunction switch in each position, make sure that continuity exists
between the terminals below. If continuity is not as specified, replace the
multi-function switch.
Lighting Switch (Auto Light)
Lighting S ...