Kia Cee'd: Cruise Control system / To increase cruise control set speed
Follow either of these procedures:
- Move the lever up (to RES+) and hold it.Your vehicle will accelerate. Release the lever at the speed you want.
- Move the lever up (to RES+) and release it immediately. The cruising speed will increase by 2 km/h (1 mph) each time you move the lever up (to RES+) in this manner.
To set cruise control speed
1. Move the lever down () on the
steering wheel, to turn the system on.
The cruise indicator light will illuminate.
2. Accelerate to the desired speed, which
must be more than 30 km/h (20 mph ...
To decrease the cruising speed
Follow either of these procedures:
Move the lever down (to SET-) and
hold it. Your vehicle will gradually slow
down. Release the lever at the speed
you want to maintain.
Move the leve ...
Other information:
Kia Cee'd JD Service Manual: Battery Sensor Repair procedures
Removal
1.
Disconnect the battery negative (-) cable.
2.
Disconnect the battery sensor connector (A).
3.
Remove the battery negative (-) cable after removing the bolts.
Install ...
Kia Cee'd JD Service Manual: Purge Control Solenoid Valve (PCSV) Description and operation
Description
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls
the passage between the canister and the intake manifold. It is a solenoid valve
and is open when the ECM grounds the valve control line. When the passage is
open (PCSV ON), fuel vapo ...
