Kia Cee'd: Tail Gate / Tail Gate Lift Repair procedures

Replacement
  
Take care to not let the tailgate fall on you as the lifts are removed. Have a helper hold the tailgate open, or use a secure method to hold it open.
1.
Using a screwdriver (A), lift up slightly the socket clips (B) of both ends on the lifter (D), and then remove the lifter from the bracket (C).

2.
Push the socket of the lifter into the bracket for installation.
  
Make sure the tail gate locks and opens properly and locks securely.
Tail Gate Latch Repair procedures
Replacement    • When prying with a flat-tip screwdriver, wrap it with protective ...

Tail Gate Weatherstrip Repair procedures
Replacement 1. Remove the tail gate weatherstrip (A).    ...

Other information:

Kia Cee'd JD Service Manual: Input Speed Sensor 1 Repair procedures
Inspection Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor. Removal 1. Turn off the ignition switch and then disconnect the battery (-) cable. 2. Remove the under cover. 3. ...

Kia Cee'd JD Service Manual: ETC (Electronic Throttle Control) System Troubleshooting
Fail-Safe Mode   Item Fail-Safe ETC Motor Throttle valve stuck at 7° TPS TPS 1 fault ECM looks at TPS2 TPS 2 fault ECM looks at TPS1 TP ...

© 2017-2025 www.kceed.com