Kia Cee'd: Tail Gate / Tail Gate Latch Repair procedures

Replacement

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Put on gloves to protect your hands.

After loosening the mounting bolts, then remove the tail gate latch assembly (A).

Tightening torque :

6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

2.	Disconnect the tail gate latch connector (A).

Install in the reverse order of removal.

•	Make sure the tail gate locks/unlocks and opens/closes properly.

•	Adjust the tail gate alignment.

•	Make sure the connectors are connected in properly.

Component Location 1. Tail gate latch assembly ...

Replacement • Take care to not let the tailgate fall on you as the lifts are r ...

Kia Cee'd JD Service Manual: Brake Pedal Components and components location
Components [LHD] 1. Cowl bracket 2. Brake pedal member assembly 3. Stop lamp switch 4. Return spring 5. Brake pedal 6. Bolt Components [RHD] 1. Cowl bracket 2. Brake pedal member assembly ...