Kia Cee'd: Tail Gate / Tail Gate Assembly Components and components location
Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Tail Gate / Tail Gate Assembly Components and components location
| Component Location |
| 1. Tail gate assembly |
Repair procedures
Adjustment
1.
After loosening the tail gate hinge (A) mounting bolt, adjust the tail
gate by moving it up or down, or right or left.
2.
...
Tail Gate Assembly Repair procedures
Replacement
•
Wear gloves to protect hands from injury.
...
Other information:
Kia Cee'd JD Service Manual: Rear Disc Brake Repair procedures
Removal [Without EPB]
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Release the parking brake lever and parking ...
Kia Cee'd JD Service Manual: Repair procedures
Inspection
1.
After disconnecting the vapor hose from the PCV valve, remove the PCV
valve.
2.
Reconnect the PCV valve to the vapor hose.
3.
Run the engine at idle, then put a finger over the open end ...
© 2017-2026 www.kceed.com
