Kia Cee'd: Body (Interior and Exterior) / Tail Gate
Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Tail Gate
- Repair procedures
- Tail Gate Assembly Components and components location
- Tail Gate Assembly Repair procedures
- Tail Gate Trim Components and components location
- Tail Gate Trim Repair procedures
- Tail Gate Latch Components and components location
- Tail Gate Latch Repair procedures
- Tail Gate Lift Repair procedures
- Tail Gate Weatherstrip Repair procedures
Hood Latch Repair procedures
Replacement
1.
Remove the front bumper cover.
(Refer to Front Bumper - "Front Bumper Cover")
2.
Remove the hood latch ...
Repair procedures
Adjustment
1.
After loosening the tail gate hinge (A) mounting bolt, adjust the tail
gate by moving it up or down, or right or left.
2.
...
Other information:
Kia Cee'd JD Owners Manual: Non-operating condition
The sensors are located inside of the
rear bumper.
Always keep the rear bumper clean for
the system to work properly.
WARNING
The warning light on the outside
rearview mirror will illuminate
whenever a vehicle is detected at
the rear side by the system.
To avoid accidents, do ...
Kia Cee'd JD Service Manual: TJ Joint Components and components location
Components
[LH]
1. BJ assembly
2. BJ circlip
3. BJ boot band
4. BJ boot
5. Shaft
6. TJ boot band
7. TJ boot
8. Spider assembly
9. Retainer ring
10. TJ housing
11. Housing circlip
...
© 2017-2026 www.kceed.com
