Kia Cee'd: Crash Pad / Steering Column Shroud Panel Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Crash Pad / Steering Column Shroud Panel Repair procedures

Replacement
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
  
Take care not to scratch the body surface.
1.
Remove the crash pad lower panel.
(Refer to Crash Pad - "Crash Pad Lower Panel")
2.
After loosening the mounting screws, then remove the steering column lower shroud panel (A).

3.
Using a screwdriver or remover, remove the steering column upper shroud panel (A).

4.
Install in the reverse order of removal.
  
Replace any damaged clips.
Steering Column Shroud Panel Components and components location
Component Location   1. Steering column lower shroud panel 2. Steering column upper shroud panel ...

Crash Pad Side Cover Components and components location
Component Location [LH]   1. Crash pad side cover [LH] [RH]   1. Crash pad side cover [RH] ...

Other information:

Kia Cee'd JD Service Manual: Rear Bumper Cover Repair procedures
Replacement    • Put on gloves to protect your hands.    • Use ...

Kia Cee'd JD Owners Manual: With central door lock/unlock switch
It is operated by pressing the door lock/ unlock switch. When you press the central door lock switch, all vehicle doors will lock and the indicator light on the switch will illuminate. If any door is opened when the switch is pressed, all doors will not lock. If any door is unlo ...

© 2017-2023 www.kceed.com