Kia Cee'd: Starting System / Starter Specifications

Kia Cee'd JD Service Manual / Engine Electrical System / Starting System / Starter Specifications

Specification

Starter [Non-ISG type]

Item		Specification
Rated voltage		12 V, 1.2 kW
The number of pinion teeth		10
Performance [No-load, 11 V]	Ampere	Max. 95 A
	Speed	Min. 2500 rpm

Starter [ISG type]

Item		Specification
Rated voltage		12 V, 1.3 kW
The number of pinion teeth		11
Performance [No-load, 12 V]	Ampere	Max. 95 A
	Speed	Min. 3400 rpm

Starter Description and operation

Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connecti ...

Starter Components and components location

Components 1. Screw 2. Front housing 3. Stop ring 4. Stopper 5. Overunn clutch 6. Lever 7. Lever plate 8. Lever packing 9. Magnet s ...

Other information:

Kia Cee'd JD Service Manual: ETC (Electronic Throttle Control) System Repair procedures
Inspection Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T. Specification: Refe ...

Kia Cee'd JD Owners Manual: Tilting the sunroof
When the sunshade is closed If you push the sunroof control lever upward, the sunshade will slide all the way open then the sunroof glass will tilt. To stop the sunroof movement at any point, pull or push the sunroof control lever momentarily. When the sunshade is opened If you push th ...