Kia Cee'd: Starting System / Starter Relay Repair procedures

Inspection
1.
Disconnect the battery negative terminal.
2.
Remove the fuse box cover.
3.
Remove the starter relay(A).

4.
Using an ohmmeter, check that there is continuity between each terminal.
 
Terminal
Continuity
30 - 87
NO
85 - 86
YES

5.
Apply 12V to terminal 85 and ground to terminal 86.
Check for continuity between terminals 30 and 87.

6.
If there is no continuity, replace the starter relay.
7.
Install the starter relay.
8.
Install the fuse box cover.
Starter Repair procedures
Removal 1. Disconnect the battery negative terminal. 2. Remove the air duct and air cleaner assembly. (Refer to Engine Mechanical ...

Cruise Control System
...

Other information:

Kia Cee'd JD Service Manual: Rail Pressure Sensor (RPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed.   Condition Output Voltage (V) ...

Kia Cee'd JD Service Manual: Ignition Coil Repair procedures
Removal 1. Disconnect the battery nagative terminal. 2. Remove the engine cover. 3. Disconnect the ignition coil connector (A).    ...

© 2017-2025 www.kceed.com