Kia Cee'd: Engine start/stop button position / START/RUN

With manual transaxle

To start the engine, depress the clutch pedal and brake pedal, then press the engine start/stop button with the shift lever in the N (Neutral) position.

With automatic transaxle/DCT

To start the engine, depress the brake pedal and press the engine start/stop button with the shift lever in the P (Park) or the N (Neutral) position. For your safety, start the engine with the shift lever in the P (Park) position.

✽ NOTICE

If you press the engine start/stop button without depressing the clutch pedal for manual transaxle vehicles or without depressing the brake pedal for automatic transaxle vehicles, the engine will not start and the engine start/stop button changes as follow:

OFF ➔ACC ➔ ON ➔ OFF or ACC

✽ NOTICE

If you leave the engine start/stop button in the ACC or ON position for a long time, the battery will discharge.

WARNING

ON
With manual transaxle Press the engine start/stop button when the button is in the ACC position without depressing the clutch pedal. With automatic transaxle/DCT Press the engine start/stop b ...

Starting the engine
WARNING Always wear appropriate shoes when operating your vehicle. Unsuitable shoes (high heels, ski boots,etc.) may interfere with your ability to use the brake and accelerator ped ...

Other information:

Kia Cee'd JD Service Manual: Troubleshooting
Troubleshooting   Symptom Suspect Area Remedy (Refer to page) Water leaks from panoramaroof  Deteriorated roof lid weatherstrip Replace Excessive roof lid-to-body clearance and im ...

Kia Cee'd JD Service Manual: Repair procedures
Inspection Lighting Switch Inspection With the multifunction switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the multi-function switch. Lighting Switch (Auto Light) Lighting S ...

© 2017-2025 www.kceed.com