Kia Cee'd: Blind Spot Detection system / Specifications

Kia Cee'd JD Service Manual / Body Electrical System / Blind Spot Detection system / Specifications

Specifications

Items	Specification
Rated voltage	DC 12V
Operating voltage	9V ~ 16V
Operating speed	30㎞/h ~ 250㎞/h
Sensible distance	70m (Sedan)
Curvature radius	Start : More than 125m/30km/h Stop : Less than 125m
Frequency	24 GHz
Numbers	2EA (Master 1EA, Slave 1EA)

Blind Spot Detection system

...

Components and components location

Components 1. Blind Spot Detection (BSD) Unit 2. BSD switch 3. BSD warning lamp 4. Cluster ...

Other information:

Kia Cee'd JD Service Manual: PAB ON/OFF Switch Repair procedures
Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Remove the crash pad side cover. (Refer ...

Kia Cee'd JD Service Manual: IMS Power Seat Control Repair procedures
Inspection 1. Disconnect the IMS control switch connector. 2. With the power IMS control switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace ...