Kia Cee'd: Auto Lighting Control System / Specifications

Specifications
 
Items
Specifications
Rated voltage
5V
Load
Max. 1mA (When head lamp lighting)
Illuminations (LUX)
50
1.42 ± 0.31V
150
3.84 ± 0.84V

Auto Lighting Control System
...

Components and components location
Component Location   1. Auto light sensor 2. Head lamps 3. Lighting switch (Auto) 4. Tail lamps 5. Body control module (BCM) ...

Other information:

Kia Cee'd JD Service Manual: ISG (Idle Stop & Go) Description and operation
Description Idle Stop & Go (ISG) system switches off the ignition when vehicle is stopped, and then restarts the ignition and starts the vehicle when accelerator is pushed. It temporarily stops the engine while waiting for signal or idling to improve fuel efficiency and ...

: Introduction
About This Publication WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. W ...

© 2017-2026 www.kceed.com