Kia Cee'd: General Information / Specifications

Kia Cee'd JD Service Manual / Steering System / General Information / Specifications

Specifications

Item		Specification
Type		Electric Power Steering System
Steering gear	Type	Rack & Pinion
Steering gear	Rack stroke	154mm (6.0630in.)
Steering angle (Max.)	Inner	38.8°± 1.5°
Steering angle (Max.)	Outer	32.2°

Tightening Torques

Item	Tightening torque (kgf.m)
Item	Nm	kgf.m	lb-ft
Wheel hub nuts	88.3 ~ 107.9	9.0 ~ 11.0	65.1 ~ 79.6
Steering wheel lock nut	39.2 ~ 44.1	4.0 ~ 4.5	28.9 ~ 32.5
Steering column & universal joint	49.0 ~ 58.8	5.0 ~ 6.0	36.2 ~ 43.4
Steering column mounting nuts	14.7 ~ 17.7	1.5 ~ 1.8	10.8 ~ 13.0
Steering column mounting bolt	44.1 ~ 49.0	4.5 ~ 5.0	32.5 ~ 36.2
Bolt connecting universal joint to pinion	32.4 ~ 37.3	3.3 ~ 3.8	23.9 ~ 27.5
Tie rod end castle nut	23.5 ~ 33.3	2.4 ~ 3.4	19.4 ~ 24.6
Lower arm to front axle	98.0 ~ 117.6	10.0 ~ 12.0	72.3 ~ 86.7
Steering gear box to sub frame	58.8 ~ 78.8	6.0 ~ 8.0	43.4 ~ 57.9
Stabilizer link nut	98.1 ~ 117.7	10.0 ~ 12.0	72.3 ~ 86.8
Sub frame mounting bolts & nuts	156.9 ~ 176.5	16.0 ~ 18.0	115.7 ~ 130.2
Sub frame stay bolts	44.1 ~ 53.9	4.5 ~ 5.5	32.5 ~ 39.8
Protector bolt	6.9 ~ 10.8	0.7 ~ 1.1	5.1 ~ 8.0

Special service tools

Special Service Tools Tool (Number and Name) Illustration Use 09561-11001 Steering wheel puller ...

Other information:

: Blind Spot Information System Requirements. Switching Blind Spot Information System On and Off
Blind Spot Information System Requirements Blind spot information system turns on when all the following occur: You start your vehicle. You shift into drive (D). The vehicle speed is greater than 6 mph (10 km/h). Switching Blind Spot Information System On and Off To switch blind spot informa ...

Kia Cee'd JD Service Manual: Starter Relay Repair procedures
Inspection 1. Disconnect the battery negative terminal. 2. Remove the fuse box cover. 3. Remove the starter relay(A). 4. Using an ohmmeter, check that there is contin ...