Kia Cee'd: Ignition Lock Switch / Specifications

Specifications
 
Item
Specifications
Working voltage
 DC 12V 
Operating force
14.7 ± 2.9N
(1.5 ± 0.3kg, 3.3 ± 0.7lb)
Working temperature
-40°C ~ 80°C
(-40°F ~ 176°F)

Description and operation
Description • Ignition lock switch is mounted on the clutch pedal. • Ignition lock switch is operated when you press the clutch peda ...

Repair procedures
Inspection Signal Circuit Inspection 1. Check ignition lock switch pull-up voltage (1) IG KEY "OFF", ENGINE "OFF&q ...

Other information:

Kia Cee'd JD Service Manual: Components and components location
Components (1) [5Door]   1. Front pillar trim 2. Cowl side trim [LH] 3. Cowl side trim [RH] 4. Center pillar upper trim 5. Center pillar lower trim 6. Rear wheel house trim 7. Rear pillar trim 8. Front door scuff trim 9 ...

Kia Cee'd JD Service Manual: Water pump Repair procedures
Removal 1. Loosen the drain plug (A), and drain the engine coolant. Remove the radiator cap to drain with speed.    System is under high pressure when t ...

© 2017-2024 www.kceed.com