| Special Service Tools |
|
Tool (Number and name) |
Illustration |
Use |
|
Crankshaft front oil seal installer (09455-21200) |
|
Installation of the front oil seal |
|
Valve stem oil seal installer (09222-2B100) |
|
Installation of the valve stem oil seal |
|
Valve spring compressor and holder A : (09222-3K000) B : (09222-3K100) |
|
Removal and installation of the intake or exhaust valve |
|
Crankshaft rear oil seal installer A : (09231-H1100) B : (09231-2B200) |
|
Installation of the crankshaft rear oil seal |
|
Ring gear stoppper (09231-2B100) |
|
Removal and installation of crankshaft pulley bolt. |
|
Ring gear stopper (09231-3D100) |
|
Removal and installation of crankshaft pulley bolt. |
|
Oil pan remover (09215-3C000) |
|
Removal of oil pan |
|
Torque angle adapter (09221-4A000) |
|
Installation of bolts & nuts needing an angular method |
|
Oil filter wrench (09263-2E000) |
|
Removal and installation of oil filter |
TroubleshootingKia Cee'd JD Owners Manual: Washer fluid
Checking the washer fluid level
Check the fluid level in the washer fluid
reservoir and add fluid if necessary.
Plain water may be used if washer fluid is
not available. However, use washer solvent
with antifreeze characteristics in
cold climates to prevent freezing.
WARNING - Coolant
...
Kia Cee'd JD Owners Manual: Charging system warning
light
This warning light indicates a malfunction
of either the generator or electrical
charging system.
If the warning light comes on while the
vehicle is in motion:
1. Drive to the nearest safe location.
2. With the engine off, check the generator
drive belt for looseness or breakage.
3. If ...