Kia Cee'd: Ignition System / Spark Plug Specifications

Specification
 
Item
Specification
Type
SILZKR6810
Gap
0.9 ~ 1.0 mm (0.0354 ~ 0.0394 in.)

Spark Plug Description and operation
Description A spark plug is a device for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/ai ...

Spark Plug Repair procedures
Inspection [On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more. 2. Remove the spark plug. ...

Other information:

: Exterior Lamps
Switching the Turn Signal Lamps On and Off Push the lever up or down to switch the turn signal lamps on. Set the lever to the middle position to switch the turn signal lamps off. Note: Tap the lever up or down to make the turn signal lamps flash three times. Switching the Daytime Running Lamps ...

Kia Cee'd JD Service Manual: Steering Column Shroud Panel Repair procedures
Replacement    • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. ...

© 2017-2026 www.kceed.com