Removal |
1. |
Remove the front bumper.
(Refer to Body - "Front Bumper Cover")
|
2. |
Pull out the SPAS sensor (A) by opening the sensor holder out.
|
3. |
Disconnect the connector form the sensor.
|
1. |
Remove the front bumper.
(Refer to Body - "Front Bumper Cover")
|
2. |
Pull out the SPAS sensor (A) by opening the sensor holder out.
|
3. |
Disconnect the connector form the sensor.
|
Installation |
1. |
Install the SPAS sensor and connector.
|
2. |
Install the front/rear bumper.
|
1. |
Install the SPAS sensor and connector.
|
2. |
Install the front bumper.
|
Kia Cee'd JD Owners Manual: Non-operational conditions of
rear parking assist system
The rear parking assist system may
not operate properly when:
1. Moisture is frozen to the sensor. (It will
operate normally when the moisture
has been cleared.)
2. The sensor is covered with foreign
matter, such as snow or water, or the
sensor cover is blocked. (It will operate
normal ...
Kia Cee'd JD Service Manual: Relay Box (Engine Compartment) Components and components location
Components
...