Kia Cee'd: SRSCM / Side Impact Sensor (SIS) Description and operation

The Side Impact Sensor (SIS) system consists of two front SIS which are installed inside the Center Pillar (LH and RH). They are remote sensors that detect acceleration due to collision at their mounting locations. The primary purpose of the Side Impact Sensor (SIS) is to provide an indication of a collision. The Side Impact Sensor (SIS) sends acceleration data to the SRSCM.

Front Impact Sensor (FIS) Repair procedures

Removal    • Removal of the airbag must be performed according to the precautions/ ...

Side Impact Sensor (SIS) Components and components location

Components ...

Other information:

Kia Cee'd JD Owners Manual: MAINTENANCE UNDER SEVERE USAGE CONDITIONS - EXCEPT EUROPE
The following items must be serviced more frequently on cars mainly used under severe driving conditions. Refer to the chart below for the appropriate maintenance intervals. R : Replace I : Inspect and if necessary, adjust, correct, clean or replace SEVERE DRIVING CONDITIONS A : Repeated ...

Kia Cee'd JD Owners Manual: Electronic Stability Control (ESC) indicator
The ESC indicator will illuminate when the ignition switch is turned ON, but should go off after approximately 3 seconds. When the ESC is on, it monitors the driving conditions. Under normal driving conditions, the ESC indicator will remain off. When a slippery or low traction condit ...