Kia Cee'd: Airbag Module / Side Airbag (SAB) Module Description and operation

Kia Cee'd JD Service Manual / Restraint / Airbag Module / Side Airbag (SAB) Module Description and operation

Description

The Side Airbags (SAB) are installed inside the front seat and protects the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of side airbag by using Side Impact Sensor (SIS) signal.

Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.

Passenger Airbag (PAB) Module Repair procedures

Removal 1. Disconnect the battery negative cable and wait for at least thirty seconds before beginning work. 2. Remove the glove box h ...

Side Airbag (SAB) Module Components and components location

Components ...

Other information:

Kia Cee'd JD Service Manual: General information
The Micro 570 Analyzer The Micro 570 Analyzer provides the ability to test the charging and starting systems, including the battery, starter and alternator. ※ Because of the possibility of personal inju ...

Kia Cee'd JD Owners Manual: Auto stop
To stop the engine in idle stop mode 1. Decrease the vehicle speed to less than 5 km/h (3 mph). 2. Shift into N (Neutral) position. 3. Release the clutch pedal. The engine will stop and the green AUTO STOP() indicator on the instrument cluster will illuminate. Also, a message "Auto St ...