Kia Cee'd: Seat Electrical / Seat Heater Repair procedures

Inspection
First Seat Heater
1.
Check for continuity and measure the resistance between terminals.

 
No.
Description
No.
Description
1
Heater(-)
3
NTC(+)
2
NTC(-)
4
Heater(+)

Standard value
Cushion : 1.27 Ω ± 10%
Back: 1.09 Ω ± 10%
Set : 2.36Ω ± 10%
2.
Operate the seat heater after connecting the connector, and then check the thermostat by measuring the temperature of seat surface.
Standard value (Fabric / Leather)
Cushion :
High : 40 ± 2°C (104 ± 3.6°F)
Low : 38 ± 2°C (100.4 ± 3.6°F)
Middle : 36 ± 2°C (96.8 ± 3.6°F)
Back :
High : 46 ± 2°C (114.8 ± 3.6°F)
Low : 43 ± 2°C (109.4 ± 3.6°F)
Middl : 40 ± 2°C (104 ± 3.6°F)
Seat Heater Schematic diagrams
Circuit Diagram ...

Fuses and Relays
...

Other information:

: Manually Opening the Fuel Filler Door - Hybrid Electric Vehicle (HEV)/Plug-In Hybrid Electric Vehicle (PHEV)
WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops. Otherwise, fuel may spray out, which could cause serious personal injury. Note:The transmission must be in park (P) or neutral (N). When using the manual ...

Kia Cee'd JD Owners Manual: Non-operational conditions of rear parking assist system
The rear parking assist system may not operate properly when: 1. Moisture is frozen to the sensor. (It will operate normally when the moisture has been cleared.) 2. The sensor is covered with foreign matter, such as snow or water, or the sensor cover is blocked. (It will operate normal ...

© 2017-2026 www.kceed.com