Kia Cee'd: Body Electrical System / Seat Electrical
- Components and components location
- Power Seat Motor Repair procedures
- Power Seat Control Switch Schematic diagrams
- Power Seat Control Switch Repair procedures
- Seat Heater Switch Schematic diagrams
- Seat Heater Switch Repair procedures
- Seat Heater Components and components location
- Seat Heater Schematic diagrams
- Seat Heater Repair procedures
Fuel Filler Door Release Actuator Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Open the tailgate and then remove the luggage side trim.
(Refer to ...
Components and components location
Components
1. Slide motor
2. Front height motor
3. Rear height motor
4. Power seat cotrol switch
5. Recline motor
6. Recline control switch
...
Other information:
Kia Cee'd JD Service Manual: Manifold Absolute Pressure Sensor (MAPS) Description and operation
Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and
is installed on the surge tank. It senses absolute pressure of the surge tank
and transfers the analog signal proportional to the pressure to the ECM. By
using this signal, the ECM calcul ...
Kia Cee'd JD Service Manual: Description and operation
Description
Exhaust emissions (CO, HC, NOx) are controlled by a combination of engine modifications
and the addition of special control components.
Modifications to the combustion chamber, intake manifold, camshaft and ignition
system form the basic control system.
Th ...
