Kia Cee'd: Body Side Molding / Roof Garnish Repair procedures

Replacement
[General Type]
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
  
Take care not to scratch the body surface.
1.
Using a screwdriver or remover, remove the roof garnish (A).

2.
Install in the reverse order of removal.
  
Replace any damaged clips.
[Panoramaroof Type]
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
  
Take care not to scratch the body surface.
1.
Using a screwdriver or remover, remove the roof garnish (A).

2.
Install in the reverse order of removal.
  
Replace any damaged clips.
Body Side Molding
...

Rear Spoiler Repair procedures
Replacement    • When prying with a flat-tip screwdriver, wrap it with protective ...

Other information:

Kia Cee'd JD Service Manual: Immobilizer Control Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - " Crash Pad Lower Panel") 3. Disconnect the connector of the immobilizer un ...

Kia Cee'd JD Service Manual: Components and components location
Component Location   1. Head lamp(High) 2. Head lamp(Low) 3. Position lamp 4. Turn signal lamp 5. Static bending lamp 6. Front fog lamp 7. DRL 8. Side repeater lamp (Door mirror) 9. Side repeater lamp 10. Overhead cons ...

© 2017-2025 www.kceed.com