Kia Cee'd: Lighting System / Rheostat Repair procedures

Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the crash pad lower switch (A) after loosening the screws.

4.
Operate the rheostat switch and check for continuity between terminals.

Hazard Lamp Switch Repair procedures
Inspection 1. It will be able to diagnose defects of hazard switch with GDS quickly. GDS can operates actuator forcefully, input/output value monitoring and ...

Front Fog Lamps Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the lighting switch of the multifunction switch. (Refer t ...

Other information:

Kia Cee'd JD Service Manual: Rear Disc Brake Components and components location
Components [Without EPB]   1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Brake pad 6. Pad retainer Components [With EPB]   1. Guide rod bolt 2. Bleed screw 3. Caliper ...

Kia Cee'd JD Service Manual: Temperature Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the warm position when connecting 12V ...

© 2017-2022 www.kceed.com