Kia Cee'd: Engine Room Under Cover / Repair procedures

Removal and Installation
1.
Remove the engine room under cover (A).
Tightening torque:
3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2.9 ~ 4.3lb-ft)

2.
Installation is reverse order of removal.
Components and components location
Components   1. Under cover front pannel. 2. Engine room LH under cover 3. Engine room RH under cover ...

Engine Mounting Components and components location
Components   1. Transaxle mounting bracket 2. Roll road bracket 3. Engine mounting bracket 4. Engine mounting support bracket ...

Other information:

Kia Cee'd JD Owners Manual: Lane departure warning system (LDWS)
This system detects the lane with the sensor at the front windshield and warns you when your vehicle leaves the lane. WARNING The LDWS does not make the vehicle change lanes. It is the driver's responsibility to always check the road conditions. Do not turn the steering whe ...

Kia Cee'd JD Service Manual: Wheel Repair procedures
Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)    When using an impact gun, final tig ...

© 2017-2025 www.kceed.com