1. Open the tailgate/trunk, and remove the towing hook from the tool case.
2. Remove the hole cover pressing the lower part of the cover on the front bumper.
3. Install the towing hook by turning it clockwise into the hole until it is fully secured.
4. Remove the towing hook and install the cover after use.
Kia Cee'd JD Service Manual: Repair procedures
Inspection
Signal Circuit Inspection
1.
Check clutch switch pull-up voltage
(1)
IG KEY "OFF", ENGINE "OFF".
(2)
Disconnect clutch switch connector.
...
Kia Cee'd JD Service Manual: Components and components location
Components
1. Slide motor
2. Front height motor
3. Rear height motor
4. Power seat cotrol switch
5. Recline motor
6. Recline control switch
7. Lumbar support motor
8. Lumbar support switch
...