Kia Cee'd: ABS(Anti-Lock Brake System) / Rear Wheel Speed Sensor Repair procedures

Kia Cee'd JD Service Manual / Brake System / ABS(Anti-Lock Brake System) / Rear Wheel Speed Sensor Repair procedures

Removal

Remove the rear wheel and tire.

Tightening torque:

88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

Remove the rear wheel speed sensor mounting bolt (A).

Tightening torque:

6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

3.	Remove the rear wheel speed sensor cable mounting bolt.

4.	Remove the rear wheel house trim. (Refer to Body - "Rear wheel house trim")

5.	Disconnect the rear wheel speed sensor connector (A), and than remove the rear wheel speed sensor.

Install in the reverse order of removal.

Install the rear sensor after lubricating the O-ring of sensor with the assembly fluid(RAREMAX AF-1)

When inserting the sensor, take care the O-ring not to be damaged.

Rear Wheel Speed Sensor Components and components location

Components 1. Rear wheel speed sensor 2. Rear wheel speed sensor connector ...

ESP(Electronic Stability Program) System

...

Other information:

Kia Cee'd JD Owners Manual: FM radio station
FM broadcasts are transmitted at high frequencies and do not bend to follow the earth's surface. Because of this, FM broadcasts generally begin to fade at short distances from the station. Also, FM signals are easily affected by buildings, mountains, or other obstructions. These can ...

Kia Cee'd JD Service Manual: Troubleshooting
Troubleshooting Ignition System Symptom Suspect Area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switch Inspect ignition lock switch, or replace as requ ...