Kia Cee'd: Interior Trim / Rear Wheel House Trim Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Interior Trim / Rear Wheel House Trim Repair procedures

Replacement
[5Door]
  
Put on gloves to protect your hands.
  
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the rear seat assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
2.
Remove the rear shelf side trim.
(Refer to Interior Trim - "Rear Shelf Side Trim")
3.
After loosening the mounting bolt and screw, then remove the rear wheel house trim (A).

4.
Install in the reverse order of removal.
  
Replace any damaged clips.
[3Door]
  
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Put on gloves to protect your hands.
1.
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
2.
Remove the rear seat back assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
3.
Remove the rear shelf side trim.
(Refer to Interior Trim - "Rear Shelf Side Trim")
4.
After loosening the mounting clip and screw, then remove the rear wheel house trim (A).

5.
Install in the reverse order of removal.
  
Replace any damaged clips.
Rear Wheel House Trim Components and components location
Component Location [5Door]   1. Rear wheel house trim [3Door]   1. Rear wheel house trim ...

Rear Transverse Trim Components and components location
Component Location   1. Rear transverse trim ...

Other information:

: Checking the Coolant
When the engine is cold, check the concentration and level of the coolant at the intervals listed in the scheduled maintenance information. Note: Make sure that the coolant level is between the minimum and maximum marks on the coolant reservoir. Note: Coolant expands when it is hot. The level ...

Kia Cee'd JD Owners Manual: Light bulbs
WARNING - Working on the lights Prior to working on the light, firmly apply the parking brake, ensure that the ignition switch is turned to the “LOCK” position (smart key: turn off the engine) and turn off the lights to avoid sudden movement of the vehicle and burning your fingers ...

© 2017-2026 www.kceed.com