Kia Cee'd: Body Side Molding / Rear Wheel Guard Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Body Side Molding / Rear Wheel Guard Repair procedures

Replacement

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Put on gloves to protect your hands.

•	Take care not to scratch the body surface.

1.	Remove the rear tire.

2.	After loosening the mounting clips and nut, then remove the rear wheel guard (A).

Install in the reverse order of removal.

•	Replace any damaged clips.

Front Wheel Guard Repair procedures

Replacement • When prying with a flat-tip screwdriver, wrap it with protective ...

Front Mud Guard Repair procedures

Replacement • When prying with a flat-tip screwdriver, wrap it with protective ...

Other information:

Kia Cee'd JD Service Manual: Fuel Pump Repair procedures
Inspection [Fuel pump] 1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Remove the fuel pump assembly. 3. Check motor operation by fuel pump connector (A) connecting power (No. ...

Kia Cee'd JD Service Manual: Alternator Specifications
Specification Alternator [Non-ISG type] Item Specification Rated voltage 13.5V, 90A Speed in use 1,000 ~ 18,000 rpm Voltage regulator IC Regulator built-in typ ...