Kia Cee'd: Rear Seat / Rear Seat Latch Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Rear Seat / Rear Seat Latch Repair procedures

Replacement
[LH]
  
Put on gloves to protect your hands.
  
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the rear seat back cover [LH].
(Refer to Rear Seat - "Rear Seat Back Cover")
2.
After loosening the mounting bolts, then remove the rear seat latch (A).
Tightening torque :
21.6 ~ 23.5 N.m (2.2 ~ 2.4 kgf.m, 15.9 ~ 17.4 lb-ft)

3.
Install in the reverse order of removal.
  
Replace any damage clips.
[RH]
  
Put on gloves to protect your hands.
  
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the rear seat back cover [RH].
(Refer to Rear Seat - "Rear Seat Back Cover")
2.
After loosening the mounting bolts, then remove the rear seat latch (A).
Tightening torque :
21.6 ~ 23.5 N.m (2.2 ~ 2.4 kgf.m, 15.9 ~ 17.4 lb-ft)

3.
Install in the reverse order of removal.
  
Replace any damage clips.
Rear Seat Latch Components and components location
Component Location   1. Rear seat latch [LH] 2. Rear seat latch [RH] ...

Front Seat Belt
...

Other information:

Kia Cee'd JD Service Manual: Special service tools
Special Service Tools   Tool (Number and Name) Illustration Use 09546-26000 Strut spring compressor Compression of coli spring 09568-34000 Ball joint puller ...

Kia Cee'd JD Owners Manual: 2. Evaporative emission control System
The Evaporative Emission Control System is designed to prevent fuel vapors from escaping into the atmosphere. Canister Fuel vapors generated inside the fuel tank are absorbed and stored in the onboard canister. When the engine is running, the fuel vapors absorbed in the canister are dr ...

© 2017-2022 www.kceed.com