Kia Cee'd: Rear Seat Belt / Rear Seat Belt Retractor Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Rear Seat Belt / Rear Seat Belt Retractor Repair procedures

Replacement
  
•
When installing the belt, make sure not to damage the retractor.
1.
Remove the rear pillar trim.
(Refer to Interior Trim - "Rear Pillar Trim")
2.
After loosening the mounting bolt, then remove the rear seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

3.
After loosening the mounting bolt, then remove the rear seat belt retractor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

4.
Install in the reverse order of removal.
  
•
Replace any damaged clips.
•
Make sure the connector is plugged in properly.
Rear Seat Belt Retractor Components and components location
Component Location   1. Rear seat belt retractor ...

Rear Center Seat Belt Retractor Components and components location
Component Location   1. Rear center seat belt retractor ...

Other information:

Kia Cee'd JD Service Manual: Front Strut Assembly Components and components location
Components   1. Strut assembly 2. Insulator 3. Strut bearing 4. Spring upper pad 5. Coil spring 6. Dust cover 7. Spring lower pad ...

Kia Cee'd JD Service Manual: Transmission Control Module (TCM) Schematic diagrams
TCM Connector and terminal function TCM Terminal Function Connector [A]   Pin Description Pin Description 1 Select actuator 17 - 2 ...

© 2017-2023 www.kceed.com