Kia Cee'd: Rear Seat Belt / Rear Center Seat Belt Retractor Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Rear Seat Belt / Rear Center Seat Belt Retractor Repair procedures

Replacement
  
When installing the belt, make sure not to damage the retractor.
1.
Remove the rear seat back cover [RH].
(Refer to Rear Seat - "Rear Seat Back Cover")
2.
After loosening the mounting nut, then remove the rear center seat belt retractor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
  
Replace any damaged clips.
Rear Center Seat Belt Retractor Components and components location
Component Location   1. Rear center seat belt retractor ...

Rear Seat Belt Buckle Components and components location
Component Location   1. Rear seat belt buckle [LH] 2. Rear seat belt buckle [RH] ...

Other information:

Kia Cee'd JD Service Manual: Rear Seat Assembly Components and components location
Component Location   1. Rear seat cushion assembly 2. Rear seat back assembly ...

Kia Cee'd JD Service Manual: Wheel Repair procedures
Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)    When using an impact gun, final tig ...

© 2017-2023 www.kceed.com