Kia Cee'd: Rear Bumper / Rear Bumper beam Assembly Components and components location
Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Rear Bumper / Rear Bumper beam Assembly Components and components location
| Component Location |
| 1. Rear bumper beam assembly
|
Rear Bumper Cover Repair procedures
Replacement
•
Put on gloves to protect your hands.
...
Rear Bumper beam Assembly Repair procedures
Replacement
•
Put on gloves to protect your hands.
...
Other information:
: Exterior Lamps
Switching the Turn Signal Lamps On and Off
Push the lever up or down to
switch the turn signal lamps on.
Set the lever to the middle position to
switch the turn signal lamps off.
Note: Tap the lever up or down to make the
turn signal lamps flash three times.
Switching the Daytime Running Lamps ...
Kia Cee'd JD Service Manual: Vacuum Pump Repair procedures
Removal
Gamma 1.6 T-GDI
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the under covers (A).
Tightening torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ ...
© 2017-2026 www.kceed.com
