Kia Cee'd: Rear Seat / Rear Back Armrest Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Rear Seat / Rear Back Armrest Repair procedures

Replacement
[5Door, Waggon only]
  
Put on gloves to protect your hands.
  
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
To remove the rear seat armrest :
(1)
Press the lock pin (A) and then push the rear seat armrest mounting bracket (B) in the direction of the arrow in the below picture.
[LH]

(2)
First, remove the lock washer (A).
[RH]

(3)
Press the lock pin (A) and then push the rear seat armrest mounting bracket (B) in the direction of the arrow in the below picture.
[RH]

2.
Remove the rear seat armrest (A) by lifting the left side.

3.
Install in the reverse order of removal.
  
Replace any damage clips.
Rear Back Armrest Components and components location
Component Location [5Door, Waggon only]   1. Rear back armrest ...

Rear Seat Latch Components and components location
Component Location   1. Rear seat latch [LH] 2. Rear seat latch [RH] ...

Other information:

Kia Cee'd JD Service Manual: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Open the tailgate and remove the tailgate trim. (Refer to Body - "Tailgate Trim") 3. Disconnect the back view camera connector ...

Kia Cee'd JD Service Manual: Components and components location
Components Location   1. Engine Control Module (ECM) 2. Manifold Absolute Pressure Sensor (MAPS) 3. Intake Air Temperature Sensor (IATS) 4. Engine Coolant Temperature Sensor (ECTS) 5. Throttle Position Sensor (TPS) [integrated into ETC Module] 6 ...

© 2017-2024 www.kceed.com