Kia Cee'd: Driveshaft and axle / Rear Axle Assembly / Rear Hub - Carrier

Kia Cee'd JD Service Manual / Driveshaft and axle / Rear Axle Assembly / Rear Hub - Carrier

BJ Boot Repair procedures
Replacement 1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint asse ...

Components and components location
Components   1. Carrier assembly 2. Rear brake assembly 3. Hub & bearing assembly 4. Rear brake disc ...

Other information:

Kia Cee'd JD Service Manual: Crankshaft Position Sensor (CKPS) Troubleshooting
Signal Waveform [NON-ISG] This example shows a typical Crankshaft Position Sensor(CkPS) and Camshaft Position Sensor(CMPS) waveform at idle.The PCM controls the injection and ignition timing by using these signals. Generally CkPS signal is used to dete ...

Kia Cee'd JD Owners Manual: Hill-start assist control (HAC)
A vehicle has the tendency to slip back on a steep hill when it starts to go after stopping. The Hill-start Assist Control (HAC) prevents the vehicle from slipping back by operating the brakes automatically for about 1~2 seconds. The brakes are released when the accelerator pedal is de ...

© 2017-2024 www.kceed.com