Kia Cee'd: Engine Control System / Rail Pressure Sensor (RPS) Specifications

Kia Cee'd JD Service Manual / Fuel System / Engine Control System / Rail Pressure Sensor (RPS) Specifications

Specification

Rail Pressure Sensor (RPS) Description and operation
Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor ele ...

Rail Pressure Sensor (RPS) Troubleshooting
Signal Waveform ...

Other information:

Kia Cee'd JD Service Manual: Rear Assist Arm Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 1 ...

Kia Cee'd JD Owners Manual: Multi fuse
If the multi fuse is blown, it must be removed as follows: 1. Turn off the engine. 2. Disconnect the negative battery cable. 3. Remove the fuse panel on the right side in the engine compartment. 4. Remove the nuts shown in the picture above. 5. Replace the fuse with a new one of the s ...

© 2017-2024 www.kceed.com