Kia Cee'd: Engine Control System / Rail Pressure Sensor (RPS) Description and operation

Kia Cee'd JD Service Manual / Fuel System / Engine Control System / Rail Pressure Sensor (RPS) Description and operation

Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor converts the pressure to voltage signal. By using this signal, the ECM can control correct injection amount and timing and adjusts the fuel pressure with the fuel pressure regulator valve if the target pressure and the actual pressure calculated by the RPS output signal are different.

Heated Oxygen Sensor (HO2S) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance betwe ...

Rail Pressure Sensor (RPS) Specifications
Specification ...

Other information:

Kia Cee'd JD Service Manual: Power Door Mirror Actuator Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door quadrant innen cover. 3. Disconnect the connector (A) from the mirror. 4. ...

Kia Cee'd JD Owners Manual: Rear fog light
■ Type A ■ Type B To turn the rear fog lights on, turn the rear fog light switch (1) to the on position when the headlight is turned on. Also, the rear fog lights turn on when the rear fog light switch is turned on after the front fog light switch (if equipped) is turned on and ...

© 2017-2023 www.kceed.com