Kia Cee'd: Engine Control System / Purge Control Solenoid Valve (PCSV) Repair procedures
| 1. |
Turn the ignition switch OFF.
|
| 2. |
Disconnect the PCSV connector.
|
| 3. |
Measure resistance between the PCSV terminals 1 and 2.
|
| 4. |
Check that the resistance is within the specification.
|
Specification: Refer to “Specification”
|
|
| 1. |
Turn the ignition switch OFF and disconnect the battery negative (-)
cable.
|
| 2. |
Disconnect the purge control solenoid valve connector (A).
|
| 3. |
Disconnect the vapor hoses (B) from the purge control solenoid valve.
|
| 4. |
Remove the valve after removing the bolt (C).
|
| • |
Install the component with the specified torques.
|
| • |
Note that internal damage may occur when the component is dropped.
If the component has been dropped, inspect before installing.
|
|
| • |
Use care to keep foreign material out of the valve.
|
|
| 1. |
Installation is reverse of removal.
|
Purge control solenoid valve bracket installation bolt: 9.8
~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
|
|
Description
Continuous Variable Valve Timing (CVVT) system advances or retards the valve
timing of the intake and exhaust valve in accordance with the ECM control signal
which is ...
Other information:
Kia Cee'd JD Owners Manual: Lap/shoulder belt
Height adjustment (5 Door and Wagon)
■ Front seat
You can adjust the height of the shoulder
belt anchor to one of 4 positions for maximum
comfort and safety.
The height of the adjusting seat belt
should not be too close to your neck.You
will not be getting the most effective protectio ...
Kia Cee'd JD Service Manual: Clutch Pedal Repair procedures
Removal
1.
Remove the battery and battery tray.
G 1.6 MPI (Refer to Engine Electrical System - "Battery")
G 1.4 MPI (Refer to Engine Electrical System - "Battery")
D 1.6 TCI-U2 (Refer to Engine Electrical System - " ...
Purge Control Solenoid Valve (PCSV) Schematic diagrams
CVVT Oil Control Valve (OCV) Description and operation