Kia Cee'd: Engine Control System / Purge Control Solenoid Valve (PCSV) Description and operation

Kia Cee'd JD Service Manual / Fuel System / Engine Control System / Purge Control Solenoid Valve (PCSV) Description and operation

Description
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when the ECM grounds the valve control line. When the passage is open (PCSV ON), fuel vapor stored in the canister is transferred to the intake manifold.

Injector Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance b ...

Purge Control Solenoid Valve (PCSV) Specifications
Specification   Item Specification Coil Resistance (Ω) 22.0 ~ 26.0 [20°C(68°F)] ...

Other information:

Kia Cee'd JD Owners Manual: Using the transmitter
Park the vehicle and stop the engine. Arm the system as described below. 1.Turn off the engine and remove the ignition key from the ignition switch. 2.Make sure that all doors, the engine hood and tailgate are closed and latched. 3.Lock the doors by pressing the lock button on the trans ...

Kia Cee'd JD Service Manual: Heater Unit Components and components location
Component Location Components   1. Heat Case (Left) 2. Heat Case (Right) 3. Separator 4. Defog Door 5. Vent Door 6. Vent Guide 7. Temp Door 8. Mode Control Actuator 9. Temperature Control Actuator (Left) 10. Temper ...

© 2017-2022 www.kceed.com