Inspection |
1. |
Remove the front door trim.
(Refer to Body - "Front Door Trim")
|
2. |
Disconnect the connector from the motor.
|
3. |
Connect the motor terminals No.2 and No.3 directly to battery voltage
(12V) and check that the motor operates smoothly.
If the operation is abnormal, replace the motor.
[Safety Power Window]
|
4. |
Connect the motor terminals directly to battery voltage (12V) and check
that the motor operates smoothly. Next, reverse the polarity and check
that the motor operates smoothly in the reverse direction. If the operation
is abnormal, replace the motor.
|
1. |
Remove the rear door trim.
(Refer to Body - "Rear Door Trim")
|
2. |
Disconnect the connector from the motor.
|
3. |
Connect the motor terminals directly to battery voltage (12V) and check
that the motor operates smoothly. Next, reverse the polarity and check
that the motor operates smoothly in the reverse direction. If the operation
is abnormal, replace the motor.
|
Kia Cee'd JD Service Manual: Seat Heater Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad center lower panel.
(Refer to Body - "Crash Pad Center Panel")
3.
Remove the center facia switch assembly ...
Kia Cee'd JD Service Manual: Description and operation
Description
Adaptive Front-lighting System (AFLS)
AFLS(Adaptive Front-lighting System)is a headlamp orientation control system
that takes into account both steering angle and vehicle speed to orient the
headlamps to an angle that provides better nighttime visibility.
...