| Inspection |
| Power Seat Motor |
| 1. |
Remove the seat and all motor connectors.
|
| 2. |
With the battery connected directly to the motor terminals, check if
the motors run smoothly.
|
| 3. |
Reverse the connections and check that the motor rotates in reverse.
|
| 4. |
If there is an abnormality, replace the motors.
|
Components and components location
Power Seat Control Switch Schematic diagramsKia Cee'd JD Service Manual: Special service tools
Special Service Tools
Tool (Number and Name)
Illustration
Use
09546-26000
Strut spring compressor
Compression of coli spring
09568-34000
Ball joint puller
...
Kia Cee'd JD Service Manual: ETC (Electronic Throttle Control) System Repair procedures
Inspection
Throttle Position Sensor (TPS)
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output voltage of TPS 1 and 2 at C.T.
and W.O.T.
Specification: Refe ...