Removal |
1. |
Disconnect the vapor hose (A).
|
2. |
Remove the PCV valve (B).
|
Inspection |
1. |
Insert a thin stick (A) into the PCV valve (B) from the threaded side
to check that the plunger movement.
|
Installation |
1. |
Installation is reverse of removal.
|
Kia Cee'd JD Owners Manual: Non-operating condition
The sensors are located inside of the
rear bumper.
Always keep the rear bumper clean for
the system to work properly.
WARNING
The warning light on the outside
rearview mirror will illuminate
whenever a vehicle is detected at
the rear side by the system.
To avoid accidents, do ...
Kia Cee'd JD Service Manual: Schematic diagrams
Circuit Diagram - ESP (1)
Circuit Diagram - ESP (2)
Circuit Diagram - ESP (3)
Circuit Diagram - ESP (4)
ESP Connector Input/ Out put
Wire No.
Designation
Current
...