Kia Cee'd: Airbag Module / Passenger Airbag (PAB) Module Repair procedures

Kia Cee'd JD Service Manual / Restraint / Airbag Module / Passenger Airbag (PAB) Module Repair procedures

Removal

1.	Disconnect the battery negative cable and wait for at least thirty seconds before beginning work.

2.	Remove the glove box housing. (Refer to Body - "Glove box housing")

3.	Disconnect the passenger airbag connector (A) and remove the PAB mounting bolts (B).

Remove the crash pad.

(Refer to Body - "Main crash pad assembly")

Replace the crash pad which is damaged while PAB is deployed.

Remove the mounting bolts from the crash pad. Then remove the passenger airbag.

The removed airbag module should be stored in a clean, dry place with the airbag cushion up.

Installation

1.	Remove the ignition key from the vehicle.

2.	Disconnect the battery negative cable from battery and wait for at least thirty seconds before beginning work.

Place a passenger airbag on the crash pad and tighten the passenger airbag mounting bolts.

Tightening torque :

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

4.	Install the crash pad. (Refer to Body - "Main crash pad assembly")

Tighten the passenger airbag mounting bolts.

Tightening torque :

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

6.	Connect the passenger airbag harness connector to the SRS main harness connector.

7.	Reinstall the glove box housing. (Refer to Body - "Glove box housing")

8.	Reconnect the battery negative cable.

After installing the passenger airbag (PAB), confirm proper system operation:

•	Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.

Passenger Airbag (PAB) Module Components and components location

Components ...

Side Airbag (SAB) Module Description and operation

Description The Side Airbags (SAB) are installed inside the front seat and protects the driver and passenger from danger when side crash occurs. The SRSCM determines deployment o ...

Other information:

Kia Cee'd JD Service Manual: Smart Key Diagnostic Repair procedures
Inspection Self Diagnosis With GDS Smart key system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis. The following three features will be major problem in SMART KEY system. 1. ...

Kia Cee'd JD Owners Manual: Voice Command List
• Common Commands: These commands can be used in most operations. (However a few commands may not be available during certain operations) • FM/AM radio Commands: Commands available during FM, AM radio operation. • Audio CD Commands: Commands available during Audio CD operat ...